Don’t want to lose a finger? Let a robot give a hand
06 March 2018
Adriana Schulz pictured with the hardware/software workflow. Image: Jason Dorfman, MIT CSAIL
Every year thousands of carpenters injure their hands and fingers doing dangerous tasks like sawing.
In an effort to minimise injury and let carpenters focus on design and other bigger-picture tasks, a team from MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) has created AutoSaw, a system that lets you customise different items that can then be constructed with the help of robots.
Range of carpenter-designed templates
Users can choose from a range of carpenter-designed templates for chairs, desks and other furniture – and eventually could use AutoSaw for projects as large as a deck or a porch.
“If you’re building a deck, you have to cut large sections of lumber to length, and that’s often done on site,” says CSAIL postdoctorate researcher Jeffrey Lipton, who was a lead author on a related paper about the system. “Every time you put a hand near a blade, you’re at risk. To avoid that, we’ve largely automated the process using a chop-saw and jigsaw.”
The system also gives general users more flexibility in designing furniture to be able to fit space-constrained houses and apartments. For example, it could allow you to modify a desk to squeeze into an L-shaped living room, or customise a table to fit in your micro-kitchen.
“Robots have already enabled mass production, but with artificial intelligence (AI) they have the potential to enable mass customisation and personalisation in almost everything we produce,” says CSAIL director and co-author Daniela Rus. “AutoSaw shows this potential for easy access and customisation in carpentry.”
The paper, which will be presented in May at the International Conference on Robotics and Automation (ICRA) in Brisbane, Australia, was co-written by Lipton, Rus and PhD student Adriana Schulz. Other co-authors include MIT professor Wojciech Matusik, PhD student Andrew Spielberg and undergraduate Luis Trueba.
How it works
Software isn’t a foreign concept for many carpenters. “Computer Numerical Control” (CNC) can convert designs into numbers that are fed to specially programmed tools to execute. However, the machines used for CNC fabrication are usually large and cumbersome, and users are limited to the size of the existing CNC tools.
As a result, many carpenters continue to use chop-saws, jigsaws, and other hand tools that are low cost, easy to move, and simple to use. These tools, while useful for customisation, still put people at a high risk of injury.
AutoSaw draws on expert knowledge for designing, and robotics for the more risky cutting tasks. Using the existing CAD system OnShape with an interface of design templates, users can customise their furniture for things like size, sturdiness, and aesthetics.
Once design is finalised, it’s sent to the robots
Once the design is finalised, it’s sent to the robots to assist in the cutting process using the jigsaw and chop-saw.
To cut lumber the team used motion tracking software and small mobile robots – an approach that takes up less space and is more cost-effective than large robotic arms.
Specifically, the team used a modified jigsaw-rigged Roomba to cut lumber of any shape on a plank. For the chopping, the team used two Kuka youBots to lift the beams, place it on the chop saw, and cut.
“We added soft grippers to the robots to give them more flexibility, like that of a human carpenter,” says Lipton. “This meant we could rely on the accuracy of the power tools instead of the rigid-bodied robots.”
After the robots finish with cutting, the user then assembles their new piece of furniture using step-by-step directions from the system.
An accuracy comparable to a human
When testing the system, the teams’ simulations showed that they could build a chair, shed, and deck. Using the robots, the team also made a table with an accuracy comparable to a human, without a real hand ever getting near a blade.
“There have been many recent AI achievements in virtual environments, like playing Go and composing music,” says Hod Lipson, a professor of mechanical engineering and data science at Columbia University.
“Systems that can work in unstructured physical environments, such as this carpentry system, are notoriously difficult to make. This is truly a fascinating step forward.”
While AutoSaw is still a research platform, in the future the team plans to use materials like wood, and integrate complex tasks like drilling and gluing.
“Our aim is to democratise furniture-customisation,” says Schulz. “We’re trying to open up a realm of opportunities so users aren’t bound to what they’ve bought at Ikea. Instead, they can make what best fits their needs.”http://www.engineersjournal.ie/2018/03/06/dont-want-to-lose-a-finger-let-a-robot-give-a-hand/http://www.engineersjournal.ie/wp-content/uploads/2018/03/a-robot.jpghttp://www.engineersjournal.ie/wp-content/uploads/2018/03/a-robot-300x300.jpgMechArtificial Intelligence,MIT,robots